General Rules

Report an issue View source Nightly · 7.3 · 7.2 · 7.1 · 7.0 · 6.5

Rules

alias

View rule source
alias(name, actual, compatible_with, deprecation, features, restricted_to, tags, target_compatible_with, testonly, visibility)

The alias rule creates another name a rule can be referred to as.

Aliasing only works for "regular" targets. In particular, package_group and test_suite cannot be aliased.

Aliasing may be of help in large repositories where renaming a target would require making changes to lots of files. You can also use alias rule to store a select function call if you want to reuse that logic for multiple targets.

The alias rule has its own visibility declaration. In all other respects, it behaves like the rule it references (e.g. testonly on the alias is ignored; the testonly-ness of the referenced rule is used instead) with some minor exceptions:

  • Tests are not run if their alias is mentioned on the command line. To define an alias that runs the referenced test, use a test_suite rule with a single target in its tests attribute.
  • When defining environment groups, the aliases to environment rules are not supported. They are not supported in the --target_environment command line option, either.

Examples

filegroup(
    name = "data",
    srcs = ["data.txt"],
)

alias(
    name = "other",
    actual = ":data",
)

Arguments

Attributes
name

Name; required

A unique name for this target.

actual

Label; required

The target this alias refers to. It does not need to be a rule, it can also be an input file.

config_setting

View rule source
config_setting(name, constraint_values, define_values, deprecation, distribs, features, flag_values, licenses, tags, testonly, values, visibility)

Matches an expected configuration state (expressed as build flags or platform constraints) for the purpose of triggering configurable attributes. See select for how to consume this rule and Configurable attributes for an overview of the general feature.

Examples

The following matches any build that sets --compilation_mode=opt or -c opt (either explicitly at the command line or implicitly from .bazelrc files):

  config_setting(
      name = "simple",
      values = {"compilation_mode": "opt"}
  )
  

The following matches any build that targets ARM and applies the custom define FOO=bar (for instance, bazel build --cpu=arm --define FOO=bar ...):

  config_setting(
      name = "two_conditions",
      values = {
          "cpu": "arm",
          "define": "FOO=bar"
      }
  )
  

The following matches any build that sets user-defined flag --//custom_flags:foo=1 (either explicitly at the command line or implicitly from .bazelrc files):

  config_setting(
      name = "my_custom_flag_is_set",
      flag_values = { "//custom_flags:foo": "1" },
  )
  

The following matches any build that targets a platform with an x86_64 architecture and glibc version 2.25, assuming the existence of a constraint_value with label //example:glibc_2_25. Note that a platform still matches if it defines additional constraint values beyond these two.

  config_setting(
      name = "64bit_glibc_2_25",
      constraint_values = [
          "@platforms//cpu:x86_64",
          "//example:glibc_2_25",
      ]
  )
  
In all these cases, it's possible for the configuration to change within the build, for example if a target needs to be built for a different platform than its dep. This means that even when a config_setting doesn't match the top-level command-line flags, it may still match some build targets.

Notes

  • See select for what happens when multiple config_settings match the current configuration state.
  • For flags that support shorthand forms (e.g. --compilation_mode vs. -c), values definitions must use the full form. These automatically match invocations using either form.
  • If a flag takes multiple values (like --copt=-Da --copt=-Db or a list-typed Starlark flag), values = { "flag": "a" } matches if "a" is present anywhere in the actual list.

    values = { "myflag": "a,b" } works the same way: this matches --myflag=a --myflag=b, --myflag=a --myflag=b --myflag=c, --myflag=a,b, and --myflag=c,b,a. Exact semantics vary between flags. For example, --copt doesn't support multiple values in the same instance: --copt=a,b produces ["a,b"] while --copt=a --copt=b produces ["a", "b"] (so values = { "copt": "a,b" } matches the former but not the latter). But --ios_multi_cpus (for Apple rules) does: -ios_multi_cpus=a,b and ios_multi_cpus=a --ios_multi_cpus=b both produce ["a", "b"]. Check flag definitions and test your conditions carefully to verify exact expectations.

  • If you need to define conditions that aren't modeled by built-in build flags, use Starlark-defined flags. You can also use --define, but this offers weaker support and is not recommended. See here for more discussion.
  • Avoid repeating identical config_setting definitions in different packages. Instead, reference a common config_setting that defined in a canonical package.
  • values, define_values, and constraint_values can be used in any combination in the same config_setting but at least one must be set for any given config_setting.

Arguments

Attributes
name

Name; required

A unique name for this target.

constraint_values

List of labels; nonconfigurable; default is []

The minimum set of constraint_values that the target platform must specify in order to match this config_setting. (The execution platform is not considered here.) Any additional constraint values that the platform has are ignored. See Configurable Build Attributes for details.

If two config_settings match in the same select and one has all the same flags and constraint_settings as the other plus additional ones, the one with more settings is chosen. This is known as "specialization". For example, a config_setting matching x86 and Linux specializes a config_setting matching x86.

If two config_settings match and both have constraint_values not present in the other, this is an error.

define_values

Dictionary: String -> String; nonconfigurable; default is {}

The same as values but specifically for the --define flag.

--define is special because its syntax (--define KEY=VAL) means KEY=VAL is a value from a Bazel flag perspective.

That means:

            config_setting(
                name = "a_and_b",
                values = {
                    "define": "a=1",
                    "define": "b=2",
                })
          

doesn't work because the same key (define) appears twice in the dictionary. This attribute solves that problem:

            config_setting(
                name = "a_and_b",
                define_values = {
                    "a": "1",
                    "b": "2",
                })
          

correctly matches bazel build //foo --define a=1 --define b=2.

--define can still appear in values with normal flag syntax, and can be mixed freely with this attribute as long as dictionary keys remain distinct.

flag_values

Dictionary: label -> String; nonconfigurable; default is {}

The same as values but for user-defined build flags.

This is a distinct attribute because user-defined flags are referenced as labels while built-in flags are referenced as arbitrary strings.

values

Dictionary: String -> String; nonconfigurable; default is {}

The set of configuration values that match this rule (expressed as build flags)

This rule inherits the configuration of the configured target that references it in a select statement. It is considered to "match" a Bazel invocation if, for every entry in the dictionary, its configuration matches the entry's expected value. For example values = {"compilation_mode": "opt"} matches the invocations bazel build --compilation_mode=opt ... and bazel build -c opt ... on target-configured rules.

For convenience's sake, configuration values are specified as build flags (without the preceding "--"). But keep in mind that the two are not the same. This is because targets can be built in multiple configurations within the same build. For example, an exec configuration's "cpu" matches the value of --host_cpu, not --cpu. So different instances of the same config_setting may match the same invocation differently depending on the configuration of the rule using them.

If a flag is not explicitly set at the command line, its default value is used. If a key appears multiple times in the dictionary, only the last instance is used. If a key references a flag that can be set multiple times on the command line (e.g. bazel build --copt=foo --copt=bar --copt=baz ...), a match occurs if any of those settings match.

filegroup

View rule source
filegroup(name, srcs, data, compatible_with, deprecation, distribs, features, licenses, output_group, restricted_to, tags, target_compatible_with, testonly, visibility)

Use filegroup to gather the outputs of a set of targets under a single label.

filegroup is not a substitute for listing targets on the command line or in an attribute of another rule, because targets have many properties other than their outputs, which are not collected in the same way. However, it's still useful in quite a few cases, for example, in the srcs attribute of a genrule, or the data attribute of a *_binary rule.

Using filegroup is encouraged instead of referencing directories directly. Directly referencing directories is discouraged because the build system does not have full knowledge of all files below the directory, so it may not rebuild when these files change. When combined with glob, filegroup can ensure that all files are explicitly known to the build system.

Examples

To create a filegroup consisting of two source files, do

filegroup(
    name = "mygroup",
    srcs = [
        "a_file.txt",
        "//a/library:target",
        "//a/binary:target",
    ],
)

Or, use a glob to fully crawl a testdata directory:

filegroup(
    name = "exported_testdata",
    srcs = glob([
        "testdata/*.dat",
        "testdata/logs/**/*.log",
    ]),
)

To make use of these definitions, reference the filegroup with a label from any rule:

cc_library(
    name = "my_library",
    srcs = ["foo.cc"],
    data = [
        "//my_package:exported_testdata",
        "//my_package:mygroup",
    ],
)

Arguments

Attributes
name

Name; required

A unique name for this target.

srcs

List of labels; default is []

The list of targets that are members of the file group.

It is common to use the result of a glob expression for the value of the srcs attribute.

data

List of labels; default is []

The list of files needed by this rule at runtime.

Targets named in the data attribute will be added to the runfiles of this filegroup rule. When the filegroup is referenced in the data attribute of another rule its runfiles will be added to the runfiles of the depending rule. See the data dependencies section and general documentation of data for more information about how to depend on and use data files.

output_group

String; default is ""

The output group from which to gather artifacts from sources. If this attribute is specified, artifacts from the specified output group of the dependencies will be exported instead of the default output group.

An "output group" is a category of output artifacts of a target, specified in that rule's implementation.

genquery

View rule source
genquery(name, deps, data, compatible_with, compressed_output, deprecation, distribs, exec_compatible_with, exec_properties, expression, features, licenses, opts, restricted_to, scope, strict, tags, target_compatible_with, testonly, visibility)

genquery() runs a query specified in the Bazel query language and dumps the result into a file.

In order to keep the build consistent, the query is allowed only to visit the transitive closure of the targets specified in the scope attribute. Queries violating this rule will fail during execution if strict is unspecified or true (if strict is false, the out of scope targets will simply be skipped with a warning). The easiest way to make sure this does not happen is to mention the same labels in the scope as in the query expression.

The only difference between the queries allowed here and on the command line is that queries containing wildcard target specifications (e.g. //pkg:* or //pkg:all) are not allowed here. The reasons for this are two-fold: first, because genquery has to specify a scope to prevent targets outside the transitive closure of the query to influence its output; and, second, because BUILD files do not support wildcard dependencies (e.g. deps=["//a/..."] is not allowed).

The genquery's output is ordered lexicographically in order to enforce deterministic output, with the exception of --output=graph|minrank|maxrank or when somepath is used as the top-level function.

The name of the output file is the name of the rule.

Examples

This example writes the list of the labels in the transitive closure of the specified target to a file.

genquery(
    name = "kiwi-deps",
    expression = "deps(//kiwi:kiwi_lib)",
    scope = ["//kiwi:kiwi_lib"],
)

Arguments

Attributes
name

Name; required

A unique name for this target.

compressed_output

Boolean; default is False

If True, query output is written in GZIP file format. This setting can be used to avoid spikes in Bazel's memory use when the query output is expected to be large. Bazel already internally compresses query outputs greater than 220 bytes regardless of the value of this setting, so setting this to True may not reduce retained heap. However, it allows Bazel to skip decompression when writing the output file, which can be memory-intensive.
expression

String; required

The query to be executed. In contrast to the command line and other places in BUILD files, labels here are resolved relative to the root directory of the workspace. For example, the label :b in this attribute in the file a/BUILD will refer to the target //:b.
opts

List of strings; default is []

The options that are passed to the query engine. These correspond to the command line options that can be passed to bazel query. Some query options are not allowed here: --keep_going, --query_file, --universe_scope, --order_results and --order_output. Options not specified here will have their default values just like on the command line of bazel query.
scope

List of labels; required

The scope of the query. The query is not allowed to touch targets outside the transitive closure of these targets.
strict

Boolean; default is True

If true, targets whose queries escape the transitive closure of their scopes will fail to build. If false, Bazel will print a warning and skip whatever query path led it outside of the scope, while completing the rest of the query.

genrule

View rule source
genrule(name, srcs, outs, cmd, cmd_bash, cmd_bat, cmd_ps, compatible_with, deprecation, distribs, exec_compatible_with, exec_properties, executable, features, licenses, local, message, output_licenses, output_to_bindir, restricted_to, tags, target_compatible_with, testonly, toolchains, tools, visibility)

A genrule generates one or more files using a user-defined Bash command.

Genrules are generic build rules that you can use if there's no specific rule for the task. For example, you could run a Bash one-liner. If however you need to compile C++ files, stick to the existing cc_* rules, because all the heavy lifting has already been done for you.

Note that genrule requires a shell to interpret the command argument. It is also easy to reference arbitrary programs available on the PATH, however this makes the command non-hermetic and may not be reproducible. If you only need to run a single tool, consider using run_binary instead.

Like every other action, the action created by genrules should not assume anything about their working directory; all Bazel guarantees is that their declared inputs will be available at the path that $(location) returns for their label. For example, if the action is run in a sandbox or remotely, the implementation of the sandbox or the remote execution will determine the working directory. If run directly (using the standalone strategy), the working directory will be the execution root, i.e. the result of bazel info execution_root.

Do not use a genrule for running tests. There are special dispensations for tests and test results, including caching policies and environment variables. Tests generally need to be run after the build is complete and on the target architecture, whereas genrules are executed during the build and on the exec architecture (the two may be different). If you need a general purpose testing rule, use sh_test.

Cross-compilation Considerations

See the user manual for more info about cross-compilation.

While genrules run during a build, their outputs are often used after the build, for deployment or testing. Consider the example of compiling C code for a microcontroller: the compiler accepts C source files and generates code that runs on a microcontroller. The generated code obviously cannot run on the CPU that was used for building it, but the C compiler (if compiled from source) itself has to.

The build system uses the exec configuration to describe the machine(s) on which the build runs and the target configuration to describe the machine(s) on which the output of the build is supposed to run. It provides options to configure each of these and it segregates the corresponding files into separate directories to avoid conflicts.

For genrules, the build system ensures that dependencies are built appropriately: srcs are built (if necessary) for the target configuration, tools are built for the exec configuration, and the output is considered to be for the target configuration. It also provides "Make" variables that genrule commands can pass to the corresponding tools.

It is intentional that genrule defines no deps attribute: other built-in rules use language-dependent meta information passed between the rules to automatically determine how to handle dependent rules, but this level of automation is not possible for genrules. Genrules work purely at the file and runfiles level.

Special Cases

Exec-exec compilation: in some cases, the build system needs to run genrules such that the output can also be executed during the build. If for example a genrule builds some custom compiler which is subsequently used by another genrule, the first one has to produce its output for the exec configuration, because that's where the compiler will run in the other genrule. In this case, the build system does the right thing automatically: it builds the srcs and outs of the first genrule for the exec configuration instead of the target configuration. See the user manual for more info.

JDK & C++ Tooling: to use a tool from the JDK or the C++ compiler suite, the build system provides a set of variables to use. See "Make" variable for details.

Genrule Environment

The genrule command is executed by a Bash shell that is configured to fail when a command or a pipeline fails, using set -e -o pipefail.

The build tool executes the Bash command in a sanitized process environment that defines only core variables such as PATH, PWD, TMPDIR, and a few others. To ensure that builds are reproducible, most variables defined in the user's shell environment are not passed though to the genrule's command. However, Bazel (but not Blaze) passes through the value of the user's PATH environment variable. Any change to the value of PATH will cause Bazel to re-execute the command on the next build.

A genrule command should not access the network except to connect processes that are children of the command itself, though this is not currently enforced.

The build system automatically deletes any existing output files, but creates any necessary parent directories before it runs a genrule. It also removes any output files in case of a failure.

General Advice

  • Do ensure that tools run by a genrule are deterministic and hermetic. They should not write timestamps to their output, and they should use stable ordering for sets and maps, as well as write only relative file paths to the output, no absolute paths. Not following this rule will lead to unexpected build behavior (Bazel not rebuilding a genrule you thought it would) and degrade cache performance.
  • Do use $(location) extensively, for outputs, tools and sources. Due to the segregation of output files for different configurations, genrules cannot rely on hard-coded and/or absolute paths.
  • Do write a common Starlark macro in case the same or very similar genrules are used in multiple places. If the genrule is complex, consider implementing it in a script or as a Starlark rule. This improves readability as well as testability.
  • Do make sure that the exit code correctly indicates success or failure of the genrule.
  • Do not write informational messages to stdout or stderr. While useful for debugging, this can easily become noise; a successful genrule should be silent. On the other hand, a failing genrule should emit good error messages.
  • $$ evaluates to a $, a literal dollar-sign, so in order to invoke a shell command containing dollar-signs such as ls $(dirname $x), one must escape it thus: ls $$(dirname $$x).
  • Avoid creating symlinks and directories. Bazel doesn't copy over the directory/symlink structure created by genrules and its dependency checking of directories is unsound.
  • When referencing the genrule in other rules, you can use either the genrule's label or the labels of individual output files. Sometimes the one approach is more readable, sometimes the other: referencing outputs by name in a consuming rule's srcs will avoid unintentionally picking up other outputs of the genrule, but can be tedious if the genrule produces many outputs.

Examples

This example generates foo.h. There are no sources, because the command doesn't take any input. The "binary" run by the command is a perl script in the same package as the genrule.

genrule(
    name = "foo",
    srcs = [],
    outs = ["foo.h"],
    cmd = "./$(location create_foo.pl) > \"$@\"",
    tools = ["create_foo.pl"],
)

The following example shows how to use a filegroup and the outputs of another genrule. Note that using $(SRCS) instead of explicit $(location) directives would also work; this example uses the latter for sake of demonstration.

genrule(
    name = "concat_all_files",
    srcs = [
        "//some:files",  # a filegroup with multiple files in it ==> $(locations)
        "//other:gen",   # a genrule with a single output ==> $(location)
    ],
    outs = ["concatenated.txt"],
    cmd = "cat $(locations //some:files) $(location //other:gen) > $@",
)

Arguments

Attributes
name

Name; required

A unique name for this target.


You may refer to this rule by name in the srcs or deps section of other BUILD rules. If the rule generates source files, you should use the srcs attribute.
srcs

List of labels; default is []

A list of inputs for this rule, such as source files to process.

This attributes is not suitable to list tools executed by the cmd; use the tools attribute for them instead.

The build system ensures these prerequisites are built before running the genrule command; they are built using the same configuration as the original build request. The names of the files of these prerequisites are available to the command as a space-separated list in $(SRCS); alternatively the path of an individual srcs target //x:y can be obtained using $(location //x:y), or using $< provided it's the only entry in srcs.

outs

List of filenames; nonconfigurable; required

A list of files generated by this rule.

Output files must not cross package boundaries. Output filenames are interpreted as relative to the package.

If the executable flag is set, outs must contain exactly one label.

The genrule command is expected to create each output file at a predetermined location. The location is available in cmd using genrule-specific "Make" variables ($@, $(OUTS), $(@D) or $(RULEDIR)) or using $(location) substitution.

cmd

String; default is ""

The command to run. Subject to $(location) and "Make" variable substitution.
  1. First $(location) substitution is applied, replacing all occurrences of $(location label) and of $(locations label) (and similar constructions using related variables execpath, execpaths, rootpath and rootpaths).
  2. Next, "Make" variables are expanded. Note that predefined variables $(JAVA), $(JAVAC) and $(JAVABASE) expand under the exec configuration, so Java invocations that run as part of a build step can correctly load shared libraries and other dependencies.
  3. Finally, the resulting command is executed using the Bash shell. If its exit code is non-zero the command is considered to have failed.
This is the fallback of cmd_bash, cmd_ps and cmd_bat, if none of them are applicable.

If the command line length exceeds the platform limit (64K on Linux/macOS, 8K on Windows), then genrule will write the command to a script and execute that script to work around. This applies to all cmd attributes (cmd, cmd_bash, cmd_ps, cmd_bat).

cmd_bash

String; default is ""

The Bash command to run.

This attribute has higher priority than cmd. The command is expanded and runs in the exact same way as the cmd attribute.

cmd_bat

String; default is ""

The Batch command to run on Windows.

This attribute has higher priority than cmd and cmd_bash. The command runs in the similar way as the cmd attribute, with the following differences:

  • This attribute only applies on Windows.
  • The command runs with cmd.exe /c with the following default arguments:
    • /S - strip first and last quotes and execute everything else as is.
    • /E:ON - enable extended command set.
    • /V:ON - enable delayed variable expansion
    • /D - ignore AutoRun registry entries.
  • After $(location) and "Make" variable substitution, the paths will be expanded to Windows style paths (with backslash).
cmd_ps

String; default is ""

The Powershell command to run on Windows.

This attribute has higher priority than cmd, cmd_bash and cmd_bat. The command runs in the similar way as the cmd attribute, with the following differences:

  • This attribute only applies on Windows.
  • The command runs with powershell.exe /c.

To make Powershell easier to use and less error-prone, we run the following commands to set up the environment before executing Powershell command in genrule.

  • Set-ExecutionPolicy -Scope CurrentUser RemoteSigned - allow running unsigned scripts.
  • $errorActionPreference='Stop' - In case there are multiple commands separated by ;, the action exits immediately if a Powershell CmdLet fails, but this does NOT work for external command.
  • $PSDefaultParameterValues['*:Encoding'] = 'utf8' - change the default encoding from utf-16 to utf-8.
executable

Boolean; nonconfigurable; default is False

Declare output to be executable.

Setting this flag to True means the output is an executable file and can be run using the run command. The genrule must produce exactly one output in this case. If this attribute is set, run will try executing the file regardless of its content.

Declaring data dependencies for the generated executable is not supported.

local

Boolean; default is False

If set to True, this option forces this genrule to run using the "local" strategy, which means no remote execution, no sandboxing, no persistent workers.

This is equivalent to providing 'local' as a tag (tags=["local"]).

message

String; default is ""

A progress message.

A progress message that will be printed as this build step is executed. By default, the message is "Generating output" (or something equally bland) but you may provide a more specific one. Use this attribute instead of echo or other print statements in your cmd command, as this allows the build tool to control whether such progress messages are printed or not.

output_licenses

Licence type; default is ["none"]

See common attributes
output_to_bindir

Boolean; nonconfigurable; default is False

If set to True, this option causes output files to be written into the bin directory instead of the genfiles directory.

toolchains

List of labels; nonconfigurable; default is []

The set of targets whose Make variables this genrule is allowed to access, or the toolchain_type targets that this genrule will access.

Toolchains accessed via toolchain_type must also provide a TemplateVariableInfo provider, which the target can use to access toolchain details.

tools

List of labels; default is []

A list of tool dependencies for this rule. See the definition of dependencies for more information.

The build system ensures these prerequisites are built before running the genrule command; they are built using the exec configuration, since these tools are executed as part of the build. The path of an individual tools target //x:y can be obtained using $(location //x:y).

Any *_binary or tool to be executed by cmd must appear in this list, not in srcs, to ensure they are built in the correct configuration.

starlark_doc_extract

View rule source
starlark_doc_extract(name, deps, src, data, compatible_with, deprecation, distribs, exec_compatible_with, exec_properties, features, licenses, render_main_repo_name, restricted_to, symbol_names, tags, target_compatible_with, testonly, visibility)

starlark_doc_extract() extracts documentation for rules, functions (including macros), aspects, and providers defined or re-exported in a given .bzl or .scl file. The output of this rule is a ModuleInfo binary proto as defined in stardoc_output.proto in the Bazel source tree.

Implicit output targets

  • name.binaryproto (the default output): A ModuleInfo binary proto.
  • name.textproto (only built if explicitly requested): the text proto version of name.binaryproto.

Warning: the output format of this rule is not guaranteed to be stable. It is intended mainly for internal use by Stardoc.

Arguments

Attributes
name

Name; required

A unique name for this target.

deps

List of labels; default is []

A list of targets wrapping the Starlark files which are load()-ed by src. These targets should under normal usage be bzl_library targets, but the starlark_doc_extract rule does not enforce that, and accepts any target which provides Starlark files in its DefaultInfo.

Note that the wrapped Starlark files must be files in the source tree; Bazel cannot load() generated files.

src

Label; required

A Starlark file from which to extract documentation.

Note that this must be a file in the source tree; Bazel cannot load() generated files.

render_main_repo_name

Boolean; default is False

If true, render labels in the main repository in emitted documentation with a repo component (in other words, //foo:bar.bzl will be emitted as @main_repo_name//foo:bar.bzl).

The name to use for the main repository is obtained from module(name = ...) in the main repository's MODULE.bazel file (if Bzlmod is enabled), or from workspace(name = ...) in the main repository's WORKSPACE file.

This attribute should be set to False when generating documentation for Starlark files which are intended to be used only within the same repository, and to True when generating documentation for Starlark files which are intended to be used from other repositories.

symbol_names

List of strings; default is []

An optional list of qualified names of exported functions, rules, providers, or aspects (or structs in which they are nested) for which to extract documentation. Here, a qualified name means the name under which an entity is made available to a user of the module, including any structs in which the entity is nested for namespacing.

starlark_doc_extract emits documentation for an entity if and only if

  1. each component of the entity's qualified name is public (in other words, the first character of each component of the qualified name is alphabetic, not "_"); and
    1. either the symbol_names list is empty (which is the default case), or
    2. the entity's qualified name, or the qualified name of a struct in which the entity is nested, is in the symbol_names list.

test_suite

View rule source
test_suite(name, compatible_with, deprecation, distribs, features, licenses, restricted_to, tags, target_compatible_with, testonly, tests, visibility)

A test_suite defines a set of tests that are considered "useful" to humans. This allows projects to define sets of tests, such as "tests you must run before checkin", "our project's stress tests" or "all small tests." The bazel test command respects this sort of organization: For an invocation like bazel test //some/test:suite, Bazel first enumerates all test targets transitively included by the //some/test:suite target (we call this "test_suite expansion"), then Bazel builds and tests those targets.

Examples

A test suite to run all of the small tests in the current package.

test_suite(
    name = "small_tests",
    tags = ["small"],
)

A test suite that runs a specified set of tests:

test_suite(
    name = "smoke_tests",
    tests = [
        "system_unittest",
        "public_api_unittest",
    ],
)

A test suite to run all tests in the current package which are not flaky.

test_suite(
    name = "non_flaky_test",
    tags = ["-flaky"],
)

Arguments

Attributes
name

Name; required

A unique name for this target.

tags

List of strings; nonconfigurable; default is []

List of text tags such as "small" or "database" or "-flaky". Tags may be any valid string.

Tags which begin with a "-" character are considered negative tags. The preceding "-" character is not considered part of the tag, so a suite tag of "-small" matches a test's "small" size. All other tags are considered positive tags.

Optionally, to make positive tags more explicit, tags may also begin with the "+" character, which will not be evaluated as part of the text of the tag. It merely makes the positive and negative distinction easier to read.

Only test rules that match all of the positive tags and none of the negative tags will be included in the test suite. Note that this does not mean that error checking for dependencies on tests that are filtered out is skipped; the dependencies on skipped tests still need to be legal (e.g. not blocked by visibility constraints).

The manual tag keyword is treated differently than the above by the "test_suite expansion" performed by the bazel test command on invocations involving wildcard target patterns. There, test_suite targets tagged "manual" are filtered out (and thus not expanded). This behavior is consistent with how bazel build and bazel test handle wildcard target patterns in general. Note that this is explicitly different from how bazel query 'tests(E)' behaves, as suites are always expanded by the tests query function, regardless of the manual tag.

Note that a test's size is considered a tag for the purpose of filtering.

If you need a test_suite that contains tests with mutually exclusive tags (e.g. all small and medium tests), you'll have to create three test_suite rules: one for all small tests, one for all medium tests, and one that includes the previous two.

tests

List of labels; nonconfigurable; default is []

A list of test suites and test targets of any language.

Any *_test is accepted here, independent of the language. No *_binary targets are accepted however, even if they happen to run a test. Filtering by the specified tags is only done for tests listed directly in this attribute. If this attribute contains test_suites, the tests inside those will not be filtered by this test_suite (they are considered to be filtered already).

If the tests attribute is unspecified or empty, the rule will default to including all test rules in the current BUILD file that are not tagged as manual. These rules are still subject to tag filtering.