टैब

समस्या की शिकायत करें सोर्स देखें

ऐसा कॉन्टेक्स्ट ऑब्जेक्ट जिसे नियम या आसपेक्ट को लागू करने के लिए पास किया जाता है. यह मौजूदा टारगेट का विश्लेषण करने के लिए ज़रूरी जानकारी और तरीकों का ऐक्सेस देता है.

खास तौर पर, इससे लागू करने का फ़ंक्शन, मौजूदा टारगेट के लेबल, एट्रिब्यूट, कॉन्फ़िगरेशन, और इसके डिपेंडेंसी के प्रोवाइडर को ऐक्सेस करता है. इसमें आउटपुट फ़ाइलों और उन्हें बनाने वाली कार्रवाइयों की घोषणा करने के तरीके होते हैं.

कॉन्टेक्स्ट ऑब्जेक्ट, कॉल के दौरान उसे लागू करने वाले फ़ंक्शन के लिए लाइव होते हैं. संबंधित ऑब्जेक्ट के अलावा, इन ऑब्जेक्ट को ऐक्सेस करना फ़ायदेमंद नहीं होता है. ज़्यादा जानकारी के लिए, नियम पेज देखें.

पैसे चुकाकर बने सदस्य

कार्रवाइयां

actions ctx.actions

इसमें आउटपुट फ़ाइलों और उन्हें जनरेट करने वाली कार्रवाइयों के बारे में जानकारी देने का तरीका शामिल है.

आयाम_आईडी

list ctx.aspect_ids

टारगेट पर लागू किए गए सभी पहलुओं के आईडी की सूची. यह सिर्फ़ लागू किए गए आसपेक्ट फ़ंक्शन में उपलब्ध है.

attr

struct ctx.attr

एट्रिब्यूट की वैल्यू ऐक्सेस करने का स्ट्रक्चर. ये वैल्यू उपयोगकर्ता से मिलती हैं (अगर नहीं, तो डिफ़ॉल्ट वैल्यू का इस्तेमाल किया जाता है). स्ट्रक्चर के एट्रिब्यूट और उनकी वैल्यू, rule फ़ंक्शन के लिए दी गई attrs डिक्शनरी की कुंजियों और वैल्यू से मेल खाती हैं. इस्तेमाल का उदाहरण देखें.

bin_dir

root ctx.bin_dir

बिन डायरेक्ट्री से जुड़ा रूट.

build_file_path

string ctx.build_file_path

सोर्स रूट के हिसाब से, इस नियम के लिए BUILD फ़ाइल का पाथ.

build_setting_value

unknown ctx.build_setting_value

प्रयोग के तौर पर. इस फ़ील्ड पर प्रयोग किया जा रहा है और यह किसी भी समय बदला जा सकता है. इस पर भरोसा न करें.

बिल्ड की सेटिंग की ऐसी वैल्यू जो मौजूदा टारगेट से दिखती है. इस फ़ील्ड को उन नियमों के लिए ऐक्सेस करते समय गड़बड़ी दिखती है जो अपने नियम की परिभाषा में build_setting एट्रिब्यूट सेट नहीं करते.

कॉन्फ़िगरेशन

configuration ctx.configuration

डिफ़ॉल्ट कॉन्फ़िगरेशन. ज़्यादा जानकारी के लिए कॉन्फ़िगरेशन का टाइप देखें.

कवरेज_इंस्ट्रुमेंटेड

bool ctx.coverage_instrumented(target=None)

इससे यह पता चलता है कि इस नियम के लिए कंपाइल करने से जुड़ी कार्रवाइयां करते समय कोड कवरेज इंस्ट्रूमेंटेशन जनरेट होना चाहिए या नहीं या अगर target दिया गया है, तो उस टारगेट से तय किया गया नियम. (अगर कोई गैर-नियम या स्टारलार्क नियम टारगेट दिया गया है, तो यह 'गलत' दिखाता है.) जांचता है कि क्या मौजूदा नियम के स्रोत (अगर कोई टारगेट नहीं दिया गया है) और टारगेट के स्रोत को -- इंस्ट्रूमेंटेशन_फ़िल्टर और -- इंस्ट्रूमेंट_टेस्ट_टारगेट कॉन्फ़िगरेशन सेटिंग के आधार पर लागू किया जाना चाहिए. यह coverage_enabled, कॉन्फ़िगरेशन से अलग होता है, जो यह बताता है कि पूरे डेटा के लिए कवरेज डेटा इकट्ठा करने की सुविधा चालू है या नहीं, लेकिन किसी खास टारगेट को लागू करने या न करने का फ़ैसला नहीं लिया जा सकता.

पैरामीटर

पैरामीटर जानकारी
target Target; or None: डिफ़ॉल्ट = कोई नहीं
नियम के बारे में बताने वाला टारगेट. अगर वैल्यू नहीं दी गई है, तो डिफ़ॉल्ट रूप से मौजूदा नियम लागू होगा.

निर्मित_कार्रवाइयां

StarlarkValue ctx.created_actions()

जिन नियमों की वजह से, _skylark_testable को True पर सेट किया जाता है वे Actions सेवा देने वाली कंपनी को दिखाते हैं. इसमें मौजूदा नियम के लिए अब तक बनाई गई सभी कार्रवाइयां दिखती हैं. अन्य सभी नियमों के लिए, None दिखाता है. ध्यान दें कि बाद में की जाने वाली कार्रवाइयों के बनने पर, सेवा देने वाली कंपनी को अपडेट नहीं किया जाता. इसलिए, अगर आप इस फ़ंक्शन की जांच करना चाहें, तो आपको इसे फिर से कॉल करना होगा.

इसका मकसद, नियम लागू करने में मदद करने वाले हेल्पर फ़ंक्शन की जांच करना है. इसके लिए, ctx ऑब्जेक्ट लिया जा सकता है और उस पर कार्रवाइयां की जा सकती हैं.

डिफ़ॉल्ट_सेवा देने वाली कंपनी

Provider ctx.default_provider

समर्थन नहीं होना या रुकना. इसके बजाय, DefaultInfo का इस्तेमाल करें.

बंद की गई सुविधाएं

list ctx.disabled_features

उन सुविधाओं का सेट जिन्हें इस नियम के लिए, उपयोगकर्ता ने साफ़ तौर पर बंद किया है.

exec_groups

ExecGroupCollection ctx.exec_groups

इस नियम के लिए उपलब्ध एक्ज़ीक्यूशन ग्रुप का कलेक्शन, जिसे उनके नाम से इंडेक्स किया गया है. ctx.exec_groups[name_of_group] की मदद से ऐक्सेस करें.

एक्ज़ीक्यूटेबल

struct ctx.executable

लेबल टाइप एट्रिब्यूटexecutable=True के तौर पर मार्क किए गए एक्ज़ीक्यूटेबल फ़ाइलें जिनमें struct होता है. स्ट्रक्चर्ड फ़ील्ड, एट्रिब्यूट के नाम से जुड़े होते हैं. स्ट्रक्चर की हर वैल्यू, File या None हो सकती है. अगर नियम में कोई वैकल्पिक एट्रिब्यूट नहीं दिया गया है, तो उससे जुड़ी संरचना की वैल्यू None होती है. अगर कोई लेबल टाइप executable=True के तौर पर मार्क न हो, तो उससे जुड़ा कोई स्ट्रक्चर्ड फ़ील्ड जनरेट नहीं होता. इस्तेमाल का उदाहरण देखें.

एक्सपैंशन_जगह

string ctx.expand_location(input, targets=[])

टारगेट $(location ...) की आउटपुट फ़ाइल के पाथ से $(location //x) को बदलकर, दी गई स्ट्रिंग में सभी $(location ...) टेंप्लेट को बड़ा करता है. एक्सपैंशन सिर्फ़ उन लेबल के लिए काम करता है जो इस नियम पर निर्भरता को दर्शाते हैं या वैकल्पिक तौर पर वैकल्पिक तर्क targets में दिए गए हैं. बताए गए टारगेट में एक से ज़्यादा आउटपुट होने पर

$(location ...) से गड़बड़ी होगी. इस मामले में, कृपया $(locations ...) का इस्तेमाल करें, क्योंकि यह आउटपुट पाथ की स्पेस से अलग की गई सूची बनाता है. इसका इस्तेमाल सुरक्षित तरीके से एक आउटपुट फ़ाइल के लिए भी किया जा सकता है.

यह फ़ंक्शन उपयोगकर्ता को BUILD फ़ाइल में निर्देश देने की अनुमति देता है, जैसे कि genrule. अन्य मामलों में, सीधे तौर पर लेबल में हेर-फेर करना बेहतर है.

पैरामीटर

पैरामीटर जानकारी
input ज़रूरी है
स्ट्रिंग को बड़ा करना.
targets sequence of Targets; डिफ़ॉल्ट = [
लुकअप की ज़्यादा जानकारी के लिए, टारगेट की सूची.
None वापस किया जा सकता है.

एक्सपैंशन_मेक_वैरिएबल

string ctx.expand_make_variables(attribute_name, command, additional_substitutions)

अब सेवा में नहीं है. इसके बजाय, वैरिएबल ऐक्सेस करने के लिए ctx.var का इस्तेमाल करें.
"वैरिएबल बनाएं" के सभी रेफ़रंस को बड़ा करने के बाद, एक स्ट्रिंग दिखाता है. वैरिएबल का फ़ॉर्मैट ऐसा होना चाहिए: $(VAR_NAME). साथ ही, $$VAR_NAME expands to $VAR_NAME. Examples:
ctx.expand_make_variables("cmd", "$(MY_VAR)", {"MY_VAR": "Hi"})  # == "Hi"
ctx.expand_make_variables("cmd", "$$PWD", {})  # == "$PWD"
Additional variables may come from other places, such as configurations. Note that this function is experimental.

          
      

Parameters

Parameter Description
attribute_name required
The attribute name. Used for error reporting.
command required
The expression to expand. It can contain references to "Make variables".
additional_substitutions required
Additional substitutions to make beyond the default make variables.

features

list ctx.features

The set of features that are explicitly enabled by the user for this rule. See example of use.

file

struct ctx.file

A struct containing files defined in label type attributes marked as allow_single_file. The struct fields correspond to the attribute names. The struct value is always a File or None. If an optional attribute is not specified in the rule then the corresponding struct value is None. If a label type is not marked as allow_single_file, no corresponding struct field is generated. It is a shortcut for:
list(ctx.attr.<ATTR>.files)[0]
In other words, use file to access the (singular) default output of a dependency. See example of use.

files

struct ctx.files

A struct containing files defined in label or label list type attributes. The struct fields correspond to the attribute names. The struct values are list of Files. It is a shortcut for:
[f for t in ctx.attr.<ATTR> for f in t.files]
In other words, use files to access the default outputs of a dependency. See example of use.

fragments

fragments ctx.fragments

Allows access to configuration fragments in target configuration.

genfiles_dir

root ctx.genfiles_dir

The root corresponding to genfiles directory.

info_file

File ctx.info_file

The file that is used to hold the non-volatile workspace status for the current build request. See documentation for --workspace_status_command for more information.

label

Label ctx.label

The label of the target currently being analyzed.

new_file

File ctx.new_file(var1, var2=unbound, var3=unbound)

DEPRECATED. Use ctx.actions.declare_file.
Creates a file object. There are four possible signatures to this method:
  • new_file(filename): Creates a file object with the given filename in the current package.
  • new_file(file_root, filename): Creates a file object with the given filename under the given file root.
  • new_file(sibling_file, filename): Creates a file object in the same directory as the given sibling file.
  • new_file(file_root, sibling_file, suffix): Creates a file object with same base name of the sibling_file but with different given suffix, under the given file root.

Does not actually create a file on the file system, just declares that some action will do so. You must create an action that generates the file. If the file should be visible to other rules, declare a rule output instead when possible. Doing so enables Blaze to associate a label with the file that rules can refer to (allowing finer dependency control) instead of referencing the whole rule.

Parameters

Parameter Description
var1 string; or root; or File; required
var2 string; or File; default = unbound
var3 string; default = unbound

outputs

structure ctx.outputs

A pseudo-struct containing all the predeclared output files, represented by File objects. See the Rules page for more information and examples.

This field does not exist on aspect contexts, since aspects do not have predeclared outputs.

The fields of this object are defined as follows. It is an error if two outputs produce the same field name or have the same label.

  • If the rule declares an outputs dict, then for every entry in the dict, there is a field whose name is the key and whose value is the corresponding File.
  • For every attribute of type attr.output that the rule declares, there is a field whose name is the attribute's name. If the target specified a label for that attribute, then the field value is the corresponding File; otherwise the field value is None.
  • For every attribute of type attr.output_list that the rule declares, there is a field whose name is the attribute's name. The field value is a list of File objects corresponding to the labels given for that attribute in the target, or an empty list if the attribute was not specified in the target.
  • (Deprecated) If the rule is marked executable or test, there is a field named "executable", which is the default executable. It is recommended that instead of using this, you pass another file (either predeclared or not) to the executable arg of DefaultInfo.

resolve_command

tuple ctx.resolve_command(command='', attribute=None, expand_locations=False, make_variables=None, tools=[], label_dict={}, execution_requirements={})

(Experimental) Returns a tuple (inputs, command, input_manifests) of the list of resolved inputs, the argv list for the resolved command, and the runfiles metadata required to run the command, all of them suitable for passing as the same-named arguments of the ctx.action method.
Note for Windows users: this method requires Bash (MSYS2). Consider using resolve_tools() instead (if that fits your needs).

Parameters

Parameter Description
command default = ''
Command to resolve.
attribute string; or None; default = None
Name of the associated attribute for which to issue an error, or None.
expand_locations default = False
Shall we expand $(location) variables? See ctx.expand_location() for more details.
make_variables dict; or None; default = None
Make variables to expand, or None.
tools sequence of Targets; default = []
List of tools (list of targets).
label_dict default = {}
Dictionary of resolved labels and the corresponding list of Files (a dict of Label : list of Files).
execution_requirements default = {}
Information for scheduling the action to resolve this command. See tags for useful keys.

resolve_tools

tuple ctx.resolve_tools(tools=[])

Returns a tuple (inputs, input_manifests) of the depset of resolved inputs and the runfiles metadata required to run the tools, both of them suitable for passing as the same-named arguments of the ctx.actions.run method.

In contrast to ctx.resolve_command, this method does not require that Bash be installed on the machine, so it's suitable for rules built on Windows.

Parameters

Parameter Description
tools sequence of Targets; default = []
List of tools (list of targets).

rule

rule_attributes ctx.rule

Rule attributes descriptor for the rule that the aspect is applied to. Only available in aspect implementation functions.

runfiles

runfiles ctx.runfiles(files=[], transitive_files=None, collect_data=False, collect_default=False, symlinks={}, root_symlinks={})

Creates a runfiles object.

Parameters

Parameter Description
files sequence of Files; default = []
The list of files to be added to the runfiles.
transitive_files depset of Files; or None; default = None
The (transitive) set of files to be added to the runfiles. The depset should use the default order (which, as the name implies, is the default).
collect_data default = False
Use of this parameter is not recommended. See runfiles guide.

Whether to collect the data runfiles from the dependencies in srcs, data and deps attributes.

collect_default default = False
Use of this parameter is not recommended. See runfiles guide.

Whether to collect the default runfiles from the dependencies in srcs, data and deps attributes.

dict; or depset of SymlinkEntrys; default = {}
Either a SymlinkEntry depset or the map of symlinks, prefixed by workspace name, to be added to the runfiles. See Runfiles symlinks in the rules guide.
dict; or depset of SymlinkEntrys; default = {}
Either a SymlinkEntry depset or a map of symlinks to be added to the runfiles. See Runfiles symlinks in the rules guide.

split_attr

struct ctx.split_attr

A struct to access the values of attributes with split configurations. If the attribute is a label list, the value of split_attr is a dict of the keys of the split (as strings) to lists of the ConfiguredTargets in that branch of the split. If the attribute is a label, then the value of split_attr is a dict of the keys of the split (as strings) to single ConfiguredTargets. Attributes with split configurations still appear in the attr struct, but their values will be single lists with all the branches of the split merged together.

target_platform_has_constraint

bool ctx.target_platform_has_constraint(constraintValue)

Returns true if the given constraint value is part of the current target platform.

Parameters

Parameter Description
constraintValue required
The constraint value to check the target platform against.

toolchains

ToolchainContext ctx.toolchains

Toolchains for the default exec group of this rule.

var

dict ctx.var

Dictionary (String to String) of configuration variables.

version_file

File ctx.version_file

The file that is used to hold the volatile workspace status for the current build request. See documentation for --workspace_status_command for more information.

workspace_name

string ctx.workspace_name

The workspace name as defined in the WORKSPACE file.